Aeromotive VaporWorx Intelligent Controller with MAP Sensor; Dual Channel (Universal; Some Adaptation May Be Required)

Dual Channel VaporWorx Intelligent Controllers With MAP Sensor Designed To Provide Modern Safety And Convenience Features For Up To 25A Per Channel Of 12DC Negative Ground Power Can Be Used In New Installations Or To Replace An Installed Traditional Relay Ideal For Carburetor-Equipped Vehicles With Electric Fuel Pumps And Intercooler Pumps Output Short Circuit Protection That Shuts Down Output Power In Case Of Pump Or Wiring Short Three Second Prime Cycle At Initial Key-On Preventing Continuous Pump Running When Engine Is Off Supplied 3bar MAP Sensor Activates Second Output/Pump At Approximately 4psi ATM Boost Includes 3bar MAP Sensor And MAP Sensor Mounting Bracket Accident Safety Feature That Shuts Down Pump When Engine Tachometer Signal Goes To Zero Manual Override For Tuning With Ignition On And Engine Off Manual Override For Intercooler Pumps With Key-Off And Engine Off Via Modified Wiring XLPE Wire And Sealed Delphi GT280 Connector With 15″ Pre-Wired Signal Circuit Wires Includes Wire Braid And Six Feet Of White 12ga Wire For Pump Circuit Made In The USA With All UL94 Rated Components, Assembled By VaporWorx Pre-Terminated Heavy-Gauge Ground Input Wiring With Controller Switching Ground Input To Pump Conservative Power Rating Limited By GT280 Plug Assembly, Electronics Support Up To 36A With Option For Higher Power Fits Universal; Some Adaptation May Be Required Modern Intelligent Controller. The Aeromotive VaporWorx Intelligent Controller with MAP Sensor; Dual Channel is a sophisticated power management device designed to upgrade fuel pump control in carbureted vehicles. It enhances safety and operational efficiency by using smart features such as short-circuit protection, timed priming, MAP sensor-based activation, and automatic shutdown in an accident. Optimized for use with electric fuel and intercooler pumps, it provides modern functionalities previously unavailable in traditional relay setups.Construction and Appearance. Constructed using high-quality XLPE wiring and genuine Delphi sealed GT280 connectors, this controller is built to endure automotive environments. It incorporates UL94 rated components and is carefully assembled in the USA by VaporWorx. The unit includes protective wire braid and ample wiring length to facilitate clean and secure installations. Its sealed connectors ensure resistance against environmental factors, making it reliable and durable.Installation. Installation is straightforward for professionals familiar with automotive electrical systems and does not typically require drilling. The pre-terminated heavy-gauge ground wiring and sealed connector simplify integration into existing or new installations, reducing the complexity of wiring tasks.Warranty. This product includes a one-year limited warranty against defects in material and workmanship.Application. Fits universal applications with some adaptation required to suit specific vehicle setups. Ideal for carbureted cars equipped with electric fuel pumps and intercooler pumps seeking updated safety and control features.